Home / Swivel Hoist Ring Capacity Chart
Hoist ring sizing
Rated loads by thread size for standard swivel hoist rings, from 1/4-20 up to 3-1/2-4, plus how to size a hoist ring for your lift.
Carr Lane standard-ring swivel hoist rings (inch)
Rated loads below are from Carr Lane's published data for their standard-ring swivel hoist rings, black oxide finish. Other brands and series (heavy-duty, side-pull, metric) have different ratings.
| Thread size (UNC) | Rated load (lbs) | Example Carr Lane part no. |
|---|---|---|
| 1/4-20 | 550 | CL-550-SHR-2 |
| 5/16-18 | 800 | CL-800-SHR-1 |
| 3/8-16 | 1,000 | CL-1000-SHR-1 |
| 1/2-13 | 2,500 | CL-2500-SHR-1 |
| 5/8-11 | 4,000 | CL-4000-SHR-1 |
| 3/4-10 | 5,000 / 7,000 | CL-5000-SHR-1 / CL-7000-SHR-1 |
| 7/8-9 | 8,000 | CL-8000-SHR-1 |
| 1-8 | 10,000 | CL-10000-SHR-1 |
| 1-1/4-7 | 15,000 | CL-15000-SHR-1 |
| 1-1/2-6 | 24,000 | CL-24000-SHR-1 |
| 2-4-1/2 | 30,000 | CL-23200-SHR |
| 2-1/2-4 | 50,000 | CL-23503-SHR |
| 3-4 | 75,000 | CL-23600-SHR |
| 3-1/2-4 | 100,000 | CL-23701-SHR |
Always use the rated load and bolt torque stamped on the hoist ring and listed in the manufacturer's current instructions. Values can change and differ between models. Contact us to confirm the rating for a specific part before you lift.
For loads above the standard range, ask about heavy-duty swivel hoist rings from ADB and Carr Lane. For wide pull angles see side-pull hoist rings, and for permanent lifting points see weld-on hoist rings.
FAQ
Swivel hoist rings are designed to swivel and pivot to align with the sling, so they keep their rated load at angles within the manufacturer's rating. The sling angle does increase the load on each lifting point, so size for the actual load per point.
A Carr Lane standard-ring 1/2-13 swivel hoist ring is rated for 2,500 lbs. Other brands and series may differ, so always check the rating on the part you use.
Yes. Metric swivel hoist rings are rated in kilograms and vary by brand. Send us your metric thread size and we'll confirm the rated load and availability.
Send your load weight, number of lifting points and thread size. We'll size the hoist ring and send a quote.
